YOKOGAWA CA71 HANDY CAL, Руководство пользователя

Страница: 60 / 110

IM CA71-E
5-7
Measurement
1
2
3
4
5
6
7
8
9
10
11
12
13
App
5.4 Measuring Temperature with
Thermocouple (TC) - CA71 only -
NOTE
Use the terminal adapter in locations where any voltage higher than 30 V
will never be imposed on the measuring circuit.
Step 1:
Using the function selector switch, select .
Step 2:
Using the key, select the type of thermocouple.
Pressing the key cycles through the 100 mV, K, E, J, T, R,
B, S, N, L and U options.
TIP
• If you select the 100 mV TC range of the SOURCE mode at the same
time, the thermocouple selected on the SOURCE mode side precedes the
one selected on the MEASURE mode side. Thus, you cannot select any
thermocouple for the 100 mV TC range of the MEASURE mode.
• If there has been a sudden change in the operating ambient temperature
of the calibrator, wait until the built-in reference junction compensation
stabilizes. Avoid using the calibrator in locations exposed to wind from
such apparatus as an air-conditioner.
• If the thermocouple has burnt out, the LCD shows the
symbol.
5.4 Measuring Temperature with Thermocouple (TC) - CA71 only -