YOKOGAWA AQ7277 Скачать руководство пользователя страница 2

Страница: 2 / 47

IM AQ7277-17EN

Foreward

Thank you for purchasing YOKOGAWA’s AQ7277.

This Communication Interface User’s Manual describes the functions and commands

of USB and Ethernet interface. To ensure proper use of the USB/Ethernet interfaces,

please read this manual thoroughly.Keep the manual in a safe place for quick reference

whenever a question arises.

Notes

• The contents of this manual are subject to change without prior notice as a result of

improvements in instrument’s performance and functions.

• Every effort has been made in the preparation of this manual to ensure the accuracy

of its contents. However, should you have any questions or find any errors, please

contact your nearest YOKOGAWA representative.

• Copying or reproduction of all or any part of the contents of this manual without

YOKOGAWA’s permission is strictly prohibited.

Trademarks

• Microsoft, Internet Explorer, Windows, and WindowsVista are either registered

trademarks or trademarks of Microsoft Corporation in the United States and/or other

countries.

• Adobe, Acrobat, and PostScript are either trademarks or registered trademarks of

Adobe Systems incorporated.

• For purposes of this manual, the ® and TM symbols do not accompany their

respective registered trademark names or trademark names.

• Other product names are registered trademarks or trademarks of their respective

holders.

Revisions

1st Edition:

March 2011

2nd Edition:

October 2017

2nd Edition :October 2017 (YMI)
All Rights Reserved, Copyright © 2011, Yokogawa Test & Measurement Corporation

Содержание AQ7277
















































Результаты поиска

Содержание AQ7277

Отзывы:

Похожие инструкции для AQ7277

Бренды по названию

Популярные бренды

YOKOGAWA AQ7277, Руководство пользователя

Результаты поиска

Содержание AQ7277

Отзывы:

Похожие инструкции для AQ7277

Бренды по названию

Популярные бренды