YOKOGAWA AQ7277 Скачать руководство пользователя страница 24

Страница: 24 / 47

4-2

IM AQ7277-17EN

4.1 A List of Commands

Command

Function

Page

:ANALysis:EMARker:SET:Y2

Sets marker Y2 of the current event or queries the current setting.

4-10

:ANALysis:DUNit

Sets the distance unit or queries the current setting.

4-10

:ANALysis:EVENt:CURRent:INDex

Changes the current event.

4-10

:ANALysis:EVENt:CURRent:NOTE

Sets the event note or queries the current setting.

4-10

:ANALysis:EVENt:IOR

Sets the section IOR of the current event or queries the current setting.

4-11

:ANALysis:EVENt:CURRent:PEAK?

Retrieves the peak decibel of the current event.

4-11

:ANALysis:EVENt:FIX

Event Fix

4-11

:ANALysis:EVENt:CURRent:DISTance?

Retrieves the distance of the current event.

4-11

:ANALysis:EVENt:CURRent:LOSS?

Retrieves the splice loss of the current event.

4-11

:ANALysis:EVENt:CURRent:RETurnloss?

Retrieves the return loss of the current event.

4-11

:ANALysis:EVENt:CURRent:CUMLoss?

Retrieves the accumulated loss of the current event.

4-11

:ANALysis:EVENt:CURRent:UNITloss?

Retrieves the loss per unit (dB/m) of the current event.

4-11

:ANALysis:EVENt:CURRent:TYPE?

Retrieves the event type of the current event.

4-11

:ANALysis:EVENt:CURRent:IOR?

Retrieves the section IOR of the current event.

4-11

:ANALysis:EVENt:DELete

Deletes the current event.

4-11

:ANALysis:EVENt:INSert

Inserts the event at the cursor position.

4-11

:ANALysis:FEDetection

Sets the fault event display or queries the current setting.

4-11

:ANALysis:FMARker:DELete

Deletes the marker.

4-12

:ANALysis:FMARker:LMTechnique

Sets the approximation method of the marker or queries the current

setting.

4-12

:ANALysi s:FMARker:LOSS?

Queries the splice loss.

4-12

:ANALysis:FMARker:RETurnloss:VALue?

Queries the return loss.

4-12

Queries the saturation of the return loss.

4-12

:ANALysis:FMARker:REFLection:VALue?

Queries the reflection level.

4-12

Queries the saturation of the reflection level.

4-12

:ANALysis:FMARker:LEFT:LOSS?

Queries the loss between markers 1 and 2.

4-12

:ANALysis:FMARker:LEFT:DISTance?

Queries the distance between markers 1 and 2.

4-12

:ANALysis:FMARker:LEFT:UNITloss?

Queries the slope between markers 1 and 2.

4-12

:ANALysis:FMARker:RIGHt:LOSS?

Queries the loss between markers 2 and 3.

4-12

:ANALysis:FMARker:RIGHt:DISTance?

Queries the distance between markers 2 and 3.

4-12

:ANALysis:FMARker:RIGHt:UNITloss?

Queries the slope between markers 2 and 3.

4-12

:ANALysis:FMARker:SET:M<x>

Sets the marker or queries the current setting.

4-12

:ANALysis:FMARker:SET:Y<x>

Sets the auxiliary marker or queries the current setting.

4-12

:ANALysis:REFerence:DELete

Deletes the distance reference.

4-13

:ANALysis:REFerence:DISTance

Sets the distance reference or queries the current setting.

4-13

:ANALysis:THReshold:EOFiber

Sets the threshold level of the end of fiber or queries the current setting.

4-13

:ANALysis:THReshold:RLOSs

Sets the threshold level of the return loss or queries the current setting.

4-13

:ANALysis:THReshold:SLOSs

Sets the threshold level of the splice loss or queries the current setting.

4-13

:ANALysis:TRACefix:STATe

Sets the tracefix or queries the current setting.

4-13

COMMunicate Group

:COMMunicate?

Queries all settings related to communications.

4-13

:COMMunicate:HEADer

Sets whether to include a header in the response to a query or queries
the current setting.

4-13

:COMMunicate:VERBose

Sets whether to return the response in full or abbreviated form or queries
the current setting.

4-13

DISPlay Group

:DISPlay:ALINe

Sets the display of the approximation line or queries the current setting.

4-14

:DISPlay:COLor

Sets the screen color or queries the current setting.

4-14

:DISPlay:CURSor:DBValue

Sets the dB value of cursor or queries the current setting..

4-14

:DISPlay:CURSor:SECond

Sets the secondary cursor display or queries the current setting.

4-14

:DISPlay:CURSor:TYPE

Sets the cursor type or queries the current setting.

4-14

:DISPlay:DECibel:UPPer

Sets the display start level or queries the current setting.

4-14

:DISPlay:DIGit:DECibel

Sets dB display digit or queries the current setting.

4-14

:DISPlay:DIGit:DISTance

Sets the distance display unit or queries the current setting.

4-14

:DISPlay:DISTance:LEFT

Sets the display start distance or queries the current setting.

4-14

:DISPlay:DIVide:DECibel

Sets the vertical zoom rate or queries the current setting.

4-15

:DISPlay:DIVide:DISTance

Sets the horizontal zoom rate or queries the current setting.

4-15

:DISPlay:GTYPe

Sets grid display or queries the current setting.

4-15

:DISPlay:IMARk

Sets the marker information display or queries the current setting.

4-15

:DISPlay:ISCale

Initializes the display scale.

4-15

:DISPlay:OVERview

Sets overview display or queries the current setting.

4-15

:DISPlay:WAVE:TYPE

Sets the waveform type display format or queries the current setting.

4-15

Содержание AQ7277
















































Результаты поиска

Содержание AQ7277

Отзывы:

Бренды по названию

Популярные бренды

YOKOGAWA AQ7277, Руководство пользователя

Результаты поиска

Содержание AQ7277

Отзывы:

Бренды по названию

Популярные бренды