YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
YMGI: Your Modern Green Idea
43
Press the FAN button to choose the amount of air flow you would like. Pressing this button sets the fan speed cycle:
auto (AUTO), low ( ), medium (
), high (
). In AUTO or DRY modes, the unit will automatically run the fan at
low speed and is not adjustable.
Press the SWING button to select the up/down air flow direction you desire. The SWING icon will display when in
use. The icon not flashing indicates the louvers are in a fixed position. In DRY mode SWING function cannot be set.
TIMER
To set the timed switch on or off, or to cancel the timer settings.
Press the TIMER button once. The hours display will flash. Use the " " or " " to set the number of hours before
you would like the unit to turn on.
Press the TIMER button a second time. The minutes display will flash. Use the "
" or " " to set the number of
minutes before you would like the unit to turn on.
Press the TIMER button a third time, and the command will be sent to the unit.
Press the TIMER button a fourth time and use the "
" or " " buttons to set the hours for the unit to turn off.
Press the TIMER button a fifth time, and use the "
" or " " buttons to set the minutes for the unit to turn off.
Press the TIMER button a sixth time, and the command will be sent to the unit.
To cancel the TIMER settings, press the TIMER button after the ON or OFF Timer function has been set.
SUPER
The SUPER button turns on SUPER operation. SUPER mode can be used in COOL or HEAT Mode, but will not work in
AUTO, DRY, or FAN Modes. If the SLEEP function is set, the SUPER function is cancelled.
When SUPER mode is selected, room temperature cannot be changed. To adjust the temperature, turn off SUPER
mode.
CLOCK
The CLOCK button is used to set the time. With unit on, press the CLOCK button. The clock on the display screen will
blink. Use the " " or " " buttons to set the time. Press the CLOCK button again to set the time.
SLEEP
The SLEEP button sets or cancels the Sleep Function. When set, the SLEEP function turns the fan speed to Low, but you
can adjust the fan speed to Medium or High speeds. If the SUPER function is set, the SLEEP function will be cancelled.
ECO
Press the ECO button to start up or turn off energy-saving function. When energy-saving function is started up, "ECO" will
be displayed on the remote controller screen, and air conditioner will adjust the set temperature automatically according to
factory settings to reach to the best energy-saving effect. Press ECO button again to exit energy-saving function.
Note:
In ECO mode, fan speed is defaulted to auto speed and it cannot be adjusted.
In ECO mode, set temperature cannot be adjusted. "TURBO" function will not work in ECO mode.
Sleep function and energy-saving function cannot operate at the same time. If ECO mode has been set while in
cooling mode, pressing the SLEEP button will cancel ECO mode. If SLEEP mode has been set while in cooling
mode, the ECO mode will cancel SLEEP.
How to Check Wattage/Power Consumption on Remote
