YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
YMGI: Your Modern Green Idea
42
Remote Control Buttons
Button
Description
TEMP UP
Press it to increase the temperature /time
setting
TEMP DOWN
Press it to increase the temperature /time
setting
ON/OFF
Press it to start or stop operation
FAN
To select the fan speed low/mid/high
TIMER
Press it to set auto-off timer
SLEEP
To activate the function "SLEEP"
ECO
Press the button, the air conditioner will
work in Fixed frequency, run in Economic
operation method
MODE
To select the mode of operation
SUPER
Press to activate the Super function which
enables the unit to reach the preset
temperature in the shortest time.
Compressor and fan motors run at
highest speeds.
SWING
To activate /deactivate the movement of
fan louvers
CLOCK
Press button, the time on the clock will
begin blinking. Press UP/DOWN to adjust
the time. Press the CLOCK bottom again
to set the time
DISPLAY
To switch on/off the LED display
HEALTHY
To switch on/off HEALTHY function, it is a
button which controls the Ionizer or
plasma generator for inverter models if
available
Introduction for remote controller buttons
Note:
Above figure shows all indicators for the purpose of illustration. When in use, only the activated function icons will be
visible. When air-conditioner is in cooling only mode, the HEAT icon indicates the fan status.
Operation of the Remote Control
Mode Selection
Point the remote control at the unit, and press the ON/OFF button to turn on the system. Then press the MODE
button to select the desired mode: AUTO, COOL, DRY, HEAT, or FAN.
Press " " or " " buttons to raise or lower the desired temperature. Temperature range is 61°F-88°F (16°C-32°C).
In AUTO or DRY modes the system is automatically set to 76°F (26°C) and cannot be adjusted.
