YMGI VRFI-07EL-D2B(55)5, Руководство пользователя

Страница: 27 / 36

27
11. Setting sleep function:
In unit on status, press SLEEP button to turn on or turn off sleep function.

When is displayed, the sleep function is on.

When is not displayed, the sleep function is off.
Notes:
1.
Sleep function cannot be set in auto and fan mode;
2.
When turning off the unit or switching mode, sleep function is cancelled.
12.
Setting I FEEL function:
In unit on status, press I FEEL button to turn on or turn off I FEEL function.
When
is displayed, I FEEL function is on.
When is not displayed, I FEEL function is off.
When I FEEL function is turned on, the unit will adjust temperature according to the temperature detected by
the remote controller to achieve the best air-conditioning effect. In this case, you should place the remote
controller within the valid receiving range.
13.
Setting timer:
You can set the operation time of unit as needed. You can also set timer ON and timer OFF in combination.
Before setting, check if the time of the system is the same as the current time. If not, set the time according to
the current local time.
1). Setting timer off:
I.
Pressing TOFF button, “OFF” is blinking and time displaying zone displays the timer time of last setting.
II. Press or button to adjust the timer time.
III.
Press TOFF button again to confirm setting. OFF is displayed and time displaying zone resumes to
display current time.
IV. Press TOFF button again to cancel timer and OFF is not displayed.
2) Setting timer on:
I.
Pressing TON button, “ON” is blinking and time displaying zone displays the timer time of last setting.
II. Press or button to adjust the timer time.
III. Press TON button again to confirm setting. ON is displayed and time displaying zone resumes to display
current time.
IV. Press TON button again to cancel timer and ON is not displayed.
Introduction of Special Functions
1. Setting child lock:
1) Press and button simultaneously to lock the buttons on the remote controller and is displayed.
2) Press and button simultaneously again to unlock the buttons on remote controller and is not
displayed.
3) If the buttons are locked, blinks 3 times when pressing the button and any operation on the button is
invalid.
2. Switching temperature scale:
1) In unit off status, press MODE button and button simultaneously to switch temperature scale between
℃
and
℉
.
3. Setting energy-saving function:
1) In unit on status and under cool mode, press CLOCK and TEMP buttons simultaneously to enter energy-
saving mode.

When is displayed, energy-saving function is on.

When is not displayed, energy-saving function is off.
To turn off the energy-saving function, press CLOCK and TEMP buttons simultaneously and is not displayed.
Note: Energy-saving function is only available in cooling mode and it will exit when switching modes or setting
sleep function.