YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
YMGI: Your Modern Green Idea
33
Maintenance
Before inspection and maintenance of the unit, please
set power switch to “OFF” to turn off the power supply.
Units
To clean Indoor units, Outdoor unit and Remote Control, wipe them with dry soft cloth.
Front Panel
Open the front panel.
Remove the air filter.
Slide the two stoppers on the left and right sides
inward until they click.
Remove the front panel. (see illustration)
•
Remove the string.
•
Allow the front panel to fall forward and then
remove it.
Cleaning the front panel.
•
Wipe clean with a soft cloth soaked in warm
water.
•
Only neutral detergents should be used.
•
After washing the front panel with water, dry it
with a soft, clean cloth.
Attach the front panel.
•
Insert the front panel into the grooves of the unit
(3 places).
•
Attach the string to the right, inner-side of the
front grille.
•
Close the panel slowly.
Do NOT touch the metal parts of the indoor unit. Some of the edges may be sharp and could cause injury.
When removing or attaching the front panel, if the unit is mounted on the ceiling, use a ladder if necessary.
When removing or attaching the front panel, support the panel securely with hands to prevent it from falling.
For cleaning, do not use: water above 40°C (104°F), benzene, gasoline, thinner, nor other volatile oils,
polishing compound, scrubbing brushes, or any other abrasives.
After cleaning, make sure the front panel is secured.
