YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
YMGI: Your Modern Green Idea
17
Installation of the Indoor Unit
Selection of the Installation Location
Select a location where cool air can be distributed throughout the room.
Select a location where condensation can be easily drained.
Select a location on the wall or floor that can support the weight of the indoor unit.
Select a location which will allow for easy access when maintenance is required.
This appliance must not be installed in the laundry or anywhere it can be exposed to excessive moisture.
There are 2 Types of Installation
Wall mounted
Floor mounted
Indoor Unit
Locate the indoor unit in a place where:
All the specifications listed in this manual and on the indoor unit installation drawings are met.
Both the air intake and exhaust are unobstructed.
The unit will not be exposed to direct sunlight.
The unit is located away from an additional heat source(s).
There is no machine oil vapor.
Cool/Warm air can be circulated throughout the room.
The unit is located away from fluorescent lamps manufactured with an electronic ignition. This includes both
inverter and rapid start types. Locations close to these types of lamps may shorten the range of the remote
controller.
The unit is at least 39.4 inches or 1 meter away from any television or radio. If located too close to a radio or
television, the unit may cause interference with the picture or sound.
Do not install the indoor unit where there is excessive oil in the area.
Do not install the indoor unit where there is acid in the environment.
Do not install the indoor unit where there is irregular electrical power supply.
Indoor Unit Installation Drawings
The indoor unit may be mounted in any of the three ways illustrated below.
