YMGI M2 SERIES Скачать руководство пользователя страница 9

BRIEF UNIT INFO

BRIEF UNIT INFO

P16 OF 44

P15 OF 44

ENGINEERING SUBMITTAL-UNIT SIZES & WEIGHT

UNIT SIZES AND WEIGHT

Check nameplates on both indoor and outdoor units to apply the correct electric power input into each unit.

Check and evaluate the security of the position and structure where the indoor and outdoor units are to be 
installed. All equipment, duct, refrigerant pipe, drainage pipe, electrical panel, and other components to be sturdy 
enough and well integrated to allow the whole HVAC system to perform its job safely and economically as 
supposed.

Refer to the dimensions and weight as shown in the following table.

K But/h

09

12

18

24

30

36

Net Weight (LB)

Indoor/Outdoor

17/61

25/87

33/101

42/123

42/136

42/176

41x12x8

49x13x9

49x13x9

49x13x9

Indoor Unit

WxHxD (Inch)   (ROUNDED) 

Outdoor Unit

31x21x13

33x24x14

32x28x15

35x31x17

35x31x15

33x48x15

 Physical Sizes/weight-Single Zone

 (Subject to Change for Continuous Improvement without Prior Notice)

K But/h

2x09

2x12

2x18

2x24

2x30

Indoor Unit

31x11x7

36x11x8

41x12x8

49x13x9

49x13x9

WxHxD (Inch)   (ROUNDED)  

Outdoor Unit

33x28x15

35x31x17

33x48x15

37x49x17

37x49x17

Net Weight (LB)

Indoor/Outdoor

2x17/112

2x25/135

2x33/200

2x42/229

2x42/257

 Physical Sizes/weight-Dual Zone 

(Subject to Change for Continuous Improvement without Prior Notice)

31x11x7

36x11x8

WxHxD (Inch)

 

   (ROUNDED) 

K But/h

3x09

3x12

3x18

2x09+12

2x09+18

2x12+18

2x12+24

2x12+30

2x18+24

Indoor

31x11x7

36x11x8

31x11x7/36x11x8

31x11x7/41x12x8

36x11x8/41x12x8

36x11x8/49x13x9

36x11x8/49x13x9

41x12x8/49x13x9

Outdoor

33x48x15

37x49x15

33x48x15

33x48x15

33x48x15

37x49x17

Net Weight (LB)

Indoor/Outdoor

3x17/200

3x25/216

3x33/222

2x17, 25/200

2x17, 33/222

2x25, 33/233

2x25, 42/240

2x25, 42/240

2x33, 44/265

Physical -Triple 

Zone

 (Subject to Change for Continuous Improvement without Prior Notice)

Sizes/weight

WxHxD (Inch)

 

   (ROUNDED) 

K But/h

4x09

4x12

3x09+12

3x12+09

2x(09+12)

Indoor

31x11x7

36x11x8

31x11x7/36x11x8

36x11x8/31x11x7

31x11x7/36x11x8

Outdoor

33x48x15

37x49x17

Net Weight (LB)

Indoor/Outdoor

4x17/200

4x25/216

3x20, 35/233

2x35, 20/265

2x(20+35)/240

Physical -Quad 

Zone 

(Subject to Change for Continuous Improvement without Prior Notice)

Sizes/weight

UNIT SIZES AND WEIGHT

41x12x8

MINI WALL MOUNT SYSTEMS-MODELS

Wall Mount Mini Split - Single Zone

Cooling Only

System Model

WMMS-09K-31A(B)

WMMS-12K-31A(B)

WMMS-18K-31B

WMMS-24K-31B

WMMS-30K-31B

WMMS-36K-31B

      Indoor Unit

WMMS-09E-31A(B)

WMMS-12E-31A(B)

WMMS-18E-31B

WMMS-24E-31B

WMMS-30E-31B

WMMS-36E-31B

Outdoor Unit

WMMS-09C-31A(B)

WMMS-12C-31A(B)

WMMS-18C-31B

WMMS-24C-31B

WMMS-30C-31B

WMMS-36C-31B

Heat Pump

System Model

WMMS-09K-32A(B)

WMMS-12K-32A(B)

WMMS-18K-32B

WMMS-24K-32B

WMMS-30K-32B

WMMS-36K-32B

Indoor Unit

WMMS-09E-32A(B)

WMMS-12E-32A(B)

WMMS-18E-32B

WMMS-24E-32B

WMMS-30E-32B

WMMS-36E-32B

Outdoor Unit

WMMS-09C-32A(B)

WMMS-12C-32A(B)

WMMS-18C-32B

WMMS-24C-32B

WMMS-30C-32B

WMMS-36C-32B

Heat Pump

/ Elec. Heat

System Model

WMMS-09K-34B

WMMS-12K-34B

WMMS-18K-34B

WMMS-24K-34B

WMMS-30K-34B

WMMS-36K-34B

      Indoor Unit

WMMS-09E-34B

WMMS-12E-34B

WMMS-18E-34B

WMMS-24E-34B

WMMS-30E-34B

WMMS-36E-34B

Outdoor Unit

WMMS-09C-32B

WMMS-12C-32B

WMMS-18C-32B

WMMS-24C-32B

WMMS-30C-32B

WMMS-36C-32B

Wall Mount Mini Split - Dual Zone

Cooling Only

System Model

      Indoor Unit

Outdoor Unit

Heat Pump

System Model

Indoor Unit

Outdoor Unit

Heat Pump

/ Elec. Heat

System Model

      Indoor Unit

Outdoor Unit

WMMS-2X09K-31B

WMMS-0912K-31B

WMMS-2X12K-31B

WMMS-2X18K-31B

WMMS-2X-24K-31B

WMMS-2X30K-31B

WMMS-09E(F)-31B

WMMS-09/12E(F)-31B

WMMS-12E(F)-31B

WMMS-18E(F)-31B

WMMS-24E(F)-31B

WMMS-30E(F)-31B

WMMS-2X09C-31B

WMMS-0912C-31B

WMMS-2X12C-31B

WMMS-2X18C-31B

WMMS-2X24C-31B

WMMS-2X30C-31B

WMMS-2X09K-32B

WMMS-0912K-32B

WMMS-2X12K-32B

WMMS-2X18K-32B

WMMS-2X24K-32B

WMMS-2X30K-32B

WMMS-09E(F)-32B

WMMS-09/12E(F)-32B

WMMS-12E(F)-32B

WMMS-18E(F)-32B

WMMS-24E(F)-32B

WMMS-30E(F)-32B

WMMS-2X09C-32B

WMMS-0912C-32B

WMMS-2X12C-32B

WMMS-2X18C-32B

WMMS-2X24C-32B

WMMS-2X30C-32B

WMMS-2X09K-34B

WMMS-0912K-34B

WMMS-2X12K-34B

WMMS-2X18K-34B

WMMS-2X24K-34B

WMMS-2X30K-34B

WMMS-09E(F)-34B

WMMS-09/12E(F)-34B

WMMS-12E(F)-34B

WMMS-18E(F)-34B

WMMS-24E(F)-34B

WMMS-30E(F)-34B

WMMS-2X09C-32B

WMMS-09/12C-32B

WMMS-2X12C-32B

WMMS-2X18C-32B

WMMS-2X24C-32B

WMMS-2X30C-32B

Wall Mount Mini Split - Triple Zone

Cooling Only

System Model

      Indoor Unit

Outdoor Unit

Heat Pump

System Model

Indoor Unit

Outdoor Unit

Heat Pump

/ Elec. Heat

System Model

      Indoor Unit

Outdoor Unit

WMMS-3X09K-31B

WMMS-3X12K-31B

WMMS-2X0912K-31B WMMS-2X-1218K-31B WMMS-2X1824K-31B

WMMS-1230K-31B

WMMS-09E(F)-31B

WMMS-09E(F)-31B

WMMS-09/12E(F)-31B WMMS-12/18E(F)-31B WMMS-18/24E(F)-31B WMMS-12/30E(F)-31B

WMMS-3X09C-31B

WMMS-3X12C-31B

WMMS-2X0912C-31B WMMS-2X1218C-31B WMMS-2X1824C-31B WMMS-2X1230C-31B

WMMS-3X09K-32B

WMMS-3X12K-32B

WMMS-2X0912K-32B WMMS-2X1218K-32B WMMS-2X1824K-32B WMMS-2X1230K-32B

WMMS-09E(F)-32B

WMMS-09E(F)-32B

WMMS-09/12E(F)-32B WMMS-12/18E(F)-32B WMMS-18/24E(F)-32B WMMS-12/30E(F)-32B

WMMS-3X09C-32B

WMMS-3X12C-32B

WMMS-2X0912C-32B WMMS-2X1218C-32B WMMS-2X1824C-32B WMMS-2X1230C-32B

WMMS-3X09K-34B

WMMS-3X12K-34B

WMMS-2X0912K-34B WMMS-2X1218K-34B WMMS-2X1824K-34B WMMS-2X1230K-34B

WMMS-09E(F)-34B

WMMS-09E(F)-34B

WMMS-09/12E(F)-34B WMMS-12/18E(F)-34B WMMS-18/24E(F)-34B WMMS-12/30E(F)-34B

WMMS-3X09C-32B

WMMS-3X12C-32B

WMMS-2X0912C-32B WMMS-2X1218C-32B

WMMS-2X1824-32B

WMMS-2X1230C-32B

Cooling Only

System Model

      Indoor Unit

Outdoor Unit

Heat Pump

System Model

Indoor Unit

Outdoor Unit

Heat Pump

/ Elec. Heat

System Model

      Indoor Unit

Outdoor Unit

Wall Mount Mini Split - Quad Zone

WMMS-4X09K-31B

WMMS-4X12K-31B

WMMS32X0912K-31B

WMMS-3X-1209K-31B

WMMS-2X(0912)K-31B

WMMS-09E(F)-31B

WMMS-12E(F)-31B

WMMS-09/12E(F)-31B

WMMS-12/09E(F)-31B

WMMS-09/12E(F)-31B

WMMS-4X09C-31B

WMMS-4X12C-31B

WMMS-3X0912C-31B

WMMS-3X1209C-31B

WMMS-2X(0912)C-31B

WMMS-4X09K-32B

WMMS-4X12K-32B

WMMS-3X0912K-32B

WMMS-3X1209K-32B

WMMS-2X(0912)K-32B

WMMS-09E(F)-32B

WMMS-12E(F)-32B

WMMS-09/12E(F)-32B

WMMS-12/09E(F)-32B

WMMS-09/12E(F)-32B

WMMS-4X09C-32B

WMMS-4X12C-32B

WMMS-3X0912C-32B

WMMS-3X1209C-32B

WMMS-2X(0912)C-32B

WMMS-4X09K-34B

WMMS-4X12K-34B

WMMS-3X0912K-34B

WMMS-3X1209K-34B

WMMS-2X(0912)K-34B

WMMS-09E(F)-34B

WMMS-12(E)F-34B

WMMS-09/12E(F)-34B

WMMS-12/09E(F)-34B

WMMS-09/12E(F)-34B

WMMS-4X09C-32B

WMMS-4X12C-32B

WMMS-3X0912C-32B

WMMS-3X1209C-32B

WMMS-2X(0912)C-34B

Wall Mount Mini -Basic Split 
Systems-Single & Multiple Zones

13 SEER

R410A 

IMPORTANT NOTES-About System Performance:

1) The rated performance data is tested under one of the  indoor & outdoor conditions at standard set-up installation.
2) Actual performance varies upon many factors such as indoor and outdoor temperatures, inter-connecting  pipe length/bending, elevation 
    difference between indoor and outdoor units, refrigerant level, vacuum level, leakage,  air or moisture or other contamilation level, foreign 
    substance left in the piping, indoor filter cleaness, indoor  and outdoor coil conditions, and others.
3) The electrical driving voltage and frequency, as well as the mechanical performing pressures and temperatures,  at different operating points, 
    during different operating periods, at different operating conditions. Suggest to measure temepratures and  pressures several minutes after 
    starting, when unit is stablized.
4) May refer to other specification tables or engineering  submittals, for detailed system performance at different conditions.
5) System performance will be degraded, if systems are improperly  selected, operated, installed, maintained, or serviced (which are not 
    conducted by manufacturer).

YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World !

YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World !

Содержание M2 SERIES
























Отзывы: