YMC Europe GmbH
Operation
YMC Pilot
33 / 49
Low pressure chromatography column
6.6
Packing adapter
Due to the increased maximum column volume, the slurry concentration can be
reduced. This way, the packing process is simplified.
1 Cap nut
8 Glass body
2 Washer
9 Cylinder screw
3 Set screw
10 Washer
4 Threaded insert
11 Cylinder screw
5 Nut
12 Coupling disc
6 Column disc (AEP)
13 O-ring glass body
7 Rod
The packing adapter is assembled as follows:
1. Remove the adjustable end piece Chapter 6.3.1, p. 27.
2. Put the pre-assembled packing adapter with the O-ring glass body on the
notch in the column body.
3. Fix the packing adapter by putting the washers over the rods. Tighten them
with the cap nuts which kept the column disc (AEP) in position before.
4. The packing adapter is ready to use.