Yingang YG125-25, Руководство по обслуживанию

Страница: 89 / 144

YG125-25 Maintenance Manual Crankcase, crankshaft and Shift mechanism
it with SST and confirm the press-in depth of the bearing. Assemble the driven shaft bearing with the with oil seal facing
inwards.
Disassembling the needle bearing may damage it; in case it is damaged, always change a new one.
Replace washer with new ones after being removed.
Apply the thread retaining adhesive LOCTITE 648 while assembling the stud bolt.
Notice:
Do not the sealing surface, and assemble the driven shaft bearing with the side with oil seal facing inwards.
No. Procedure Quantity Remarks
Removing order Installation is in the reverse order of removal
1 Right hand crankcase 1
2 Balance shaft bearing
6302
1 Apply engine oil while assembling
3
Driving shaft bearing
62/22/C3
1
Let the oil seal side face inward and apply engine
oil while assembling
4 Gear shift shaft oil seal
18x34x5
1 Apply engine oil while assembling
5
Driven shaft bearing
60/18RLYAB
1
Let the oil seal side face inward and apply engine
oil while assembling
6 Driving shaft bearing pressure plate 1
7
Stud bolt M6
×
16
2
Use thread retaining adhesive LOCTITE 648
while assembling
92