Yingang YG125-25, Руководство по обслуживанию

Страница: 85 / 144

YG125-25 Maintenance Manual Crankcase, crankshaft and Shift mechanism
Crankcase
To remove the crankcase:
1. Remove the engine from the frame (engine oil fully
drained) and put it on the assembly operating table.
2. Remove such parts and components as right hand
crankcase cover, clutch, gear shifter, cylinder head
cover, camshaft, cylinder head, cylinder, piston, left
front cover, rotor assembly, electrical starting
transmission system, driving drive sprocket, etc.
(Refer to the related sections).
3. Use a bakelite hammer or a nylon hammer to strike
the left hand crankcase gently to separate it with the
right hand crankcase.
4. Remove the driving/driven shaft, gearshift drum, shift
fork, etc.
5. Remove the cranks-haft and balance shaft
。
Notice
Do not pry the left/right hand crankcase body by
inserting such tools as screwdrivers into the mould
closing face.
To mount the crankcase:
1. Place the right hand crankcase on the assembly
operating table, and assemble the internal parts and
components of the crankcase, including crankshaft,
balance shaft, driving/driven shaft, gearshift drum,
shift fork, etc
2. Clean up the left and right crankcase box surface,
put the new crankcase paper pad, confirm the
positioning pin.
3. Use the counter shaft oil seal guide to
protect the counter shaft oil seal, use the gearshift
drum oil seal guide to protect the gearshift
drum oil seal, and mount the left hand crankcase
(closing).
Balance shaft
Gearshift
Crankshaft box paper pad
Driving shaft
Counter shaft
Cranks-haft
Counter shaft oil seal
Gearshift drum oil seal
Shifting arm oil seal
Remove the mould closing bolt
88