Yingang YG125-25, Руководство по обслуживанию

Страница: 69 / 144

YG125-25 Maintenance Manual Clutch and Right crankcase cover
1. Remove the right crankcase cover (See “Removal of
2. right crankcase cover").
3. Remove the clutch push rod with the clutch push rod
extractor .
4. Use the fastening tool to clamp the primary
driving and driven gear, and remove the nut M18
and butterfly washer.
5. Remove the clutch.
6. Remove the clutch washer.
To install the clutch:
1. Mount the clutch washer with the sabotage side
facing the main shaft right bearing.
2. Mount the clutch.
3. Mount the butterfly washer and retaining nut M18.
Note to assemble with the protruding side of the
butterfly nut washer facing outside.
4. Use the fastening tool to clamp the primary
driving and driven gear, and screw up the retaining
nut M18 to the tightening torque of 120N.m.
5. Mount the clutch push rod with the clutch push rod
assembler .
Clutch push rod
Nut
Washer
Clutch Washer
Clutch Washer
Fastening tool
Fastening tool
71