Yingang YG125-25, Руководство по обслуживанию

Страница: 101 / 144

YG125-25 Maintenance Manual Frame and exhaust system
Headlamp dimming
Before driving, check the brightness, direction, etc. of the
headlamp.
The adjustment can be made to the headlamp in the left /
right and vertical directions.

Loose the screw to disassemble the headlight.

Rotating , directly unplugging

Rotating and disassemble the bulb.

Install the new bulb in reverse order
Headlight bulb 12V55W
Position lamp bulb

Unplugging the sidelight seat

Unplugging the sidelight bulb
Replacement of turn lamp bulb

Loosen the screws, remove the lamp lampshade

Lightly press bulb, rotate in counter-clockwise.

Install new bulb in opposite order as below.
Front and rear lamp bulb12V10W
Taillight
、
Taillight bulb

Loosen the screws, remove the taillight lampshade

Lightly rotate taillight seat, take out the seat and
bulb.

Lightly press bulb, rotate in counter-clockwise.

Install new bulb in opposite order as below.
Taillight bulb
：
12V21/5W
Removal / installation of exhaust muffler
To remove the exhaust muffler:

Park the motorcycle on the plane ground with main
stand; pull off the oxygen sensor patch plug.
Screw
Taillight lampshade
Bulb
Adjusting bolt
105