a. Choosing Synergic MIG Setting
Select Synergic MIG this is a predefined setting based on Gas and wire used. The machine will preselect voltage and amperage
allowing the user to quickly find the best welding parameters.
Simply select the correct wire diameter and gas type that you’re using then dial in your desired wire feed speed for the job. Use
more wire speed for thicker material and less wire speed for thinner material. The Synergic MIG system will auto-adjust the welding
voltage to give you an ideal arc condition while welding.
1. Choose the material and shield gas, Fe 75% Argon 25% CO
2
/Fe 100% CO
2
/SS 98% Argon 2% CO
2
.
2. Select suitable wire size.
3. Adjust the output current with adjustment knob (1), wire feed speed & arc voltage will match automatically.
4. Press selector button (6) to fine tune the auto-adjusted voltage(-5~+5V) to personalize your setting for optimal results. (each 1
value=0.3V, reduce 1.5V~add 1.5V)
5. Press adjustment knob (1) to select welding parameters.
6. Bring the gun close to the workpiece and press the trigger.
1). STP: Set torch operation 2T/4T.
When 2T operation is selected, press trigger Arc starts, release trigger, Arc stops.
When 4T operation is selected, press and release trigger Arc starts, press and release trigger Arc stops.
2). IND: inductance, adjust the inductance from -10 ~ +10% with adjustment knob (1), The effects of the inductance can help
reduce spatter, produce a “softer” arc and help wetting out. There is a wetting-out/softness trade off against penetra-
tion/stiff/arc-force/dig qualities.
3). bbt: burn back time, range from 0~10, This setting is used to adjust how long a wire is electrically energized after the wire
has stopped being fed.
4). rin: the speed of the wire prior to the welding arc being struck. range from 0~10%.
5). hs: hot start, arc start current, range from 0~10%.
- 15 -
VoltageVoltage
Material & Shield Gas
Wire Dia
Amperage Range
110V
Fe 75% Argon 25% CO
2
0.6mm .023"
40~160A
0.8mm .030"
43~160A
0.9mm .035"
60~160A
Fe 100% CO
2
0.6mm .023"
40~160A
0.8mm .030"
30~160A
0.9mm .035"
70~160A
SS 98% Argon 2% CO
2
0.6mm .023"
40~160A
0.8mm .030"
43~160A
0.9mm .035"
60~160A
Al 100% Argon
0.9mm .035"
50~160A
1.2mm .045"
65~160A
220V
Fe 75% Argon 25% CO
2
0.6mm .023"
40~200A
0.8mm .030"
43~200A
0.9mm .035"
60~200A
Fe 100% CO
2
0.6mm .023"
40~200A
0.8mm .030"
30~200A
0.9mm .035"
70~200A
SS 98% Argon 2% CO
2
0.6mm .023"
40~200A
0.8mm .030"
43~200A
0.9mm .035"
60~200A
Al 100% Argon
0.9mm .035"
50~200A
1.2mm .045"
65~200A
How To Set The Welding Parameters:
Содержание YWM-200
Страница 34: ...31 WIRING DIAGRAM...
Страница 35: ......
Страница 36: ...WE ALWAYS STAND BEHIND IT Toll Free 855 937 4567 www yeswelder com...
