yellow jacket CA502, Руководство пользователя и по обслуживанию

Страница: 26 / 68

26
10.2 Menu → Measurements → Comb. analysis
11/12/17 10:00
SET ANALYSIS
►Mode Auto
Fuel
Natural gas
Interval 7 s
Memory 1/5
Status Free
Start
INTERACTIVE OPERATION FUNCTION
Starts the analysis with the selected mode
PARAMETER DESCRIPTION
Mode
This menu allows the user to choose among 2 different analysis modes: Manual or Auto
Manual : In manual mode, the combustion analysis is performed manually by
setting the ‘ Fuel ’ parameter.
Then, the manual analysis can start wait at least two minutes for the shown
values to stabilize. Once stable, it is possible to proceed with the recording or
directly to printing depending on the setting made.
In this mode it is possible to print or save just one combustion analysis
containing all the data necessary.
Auto: In this mode the instrument performs 3 different measures divided by a time
gap defined by the user using the sub parameter ‘ interval ‘. It is possible
to select the memory space to store the analysis and set the used fuel
type.
In all modes, the data displayed for CO / NO / NO
x
can be normalized with reference to the
concentration of O
2
previously set in “ configuration => analysis ” menu.
This menu is for the selection of the fuel to be used in the analysis phase. This data can be
changed in this menu and in the configuration menu.
Interval
ONLY IN ‘ AUTO MODE ’ .
Sets the time interval for the sample recording with a value between 1 and 900 seconds.
Memory
ONLY IN ‘ AUTO MODE ’ .
Selects the memory number where the analysis is saved. If the memory is full it is possible to
choose whether to overwrite the existing values.
KEY FUNCTION
Activate the context keys shown on the
display.
Returns to the previous screen.
Selects the available parameters.
Enters the selected parameter and con-
firms the choice made.
> >
ESC
OK
>
>
Start
TO PERFORM THE COMBUSTION ANALYSIS REFER TO CHAPTER 8.0