Yeastar Technology S-Series Скачать руководство пользователя

Страница: 86 / 128

S-Series IP PBX Administrator Guide

Extension Pickup

Dial this feature code and an extension number to pick up a call

that is ringing at the extension.

The default feature code is *04.

Intercom

Intercom

Dial this feature code and an extension number to page that

extension.

The default feature code is *5.

Call Parking

Call Parking

Dial this feature code to put a call on hold and park the call at an

extension number directed by the system. Any other phone can

dial this extension number to resume the conversation.

The default feature code is *6.

Directed Call Parking

Dial this feature code and an extension number to park the call at

that extension. Any other phone can dial this extension number to

resume the conversation.

The default feature code is *6.

Note: if the directed extension number is occupied, the call parking

will fail.

Parking Extension Range

A range of extensions where the call will be parked.

Parking Timeout

This defines the number of seconds that a call can be parked

before it is recalled by an extension.

Call Forwarding

Reset to Defaults

Dial this feature code to restore call forwarding to the following

default settings:



Always Forward: disabled



Busy Forward to Voicemail: enabled



No Answer Forward to Voicemail: enabled



Do Not Disturb: disabled.

The default feature code is *70.

Enable Forward All Calls

Dial this feature code to forward all calls to voicemail or a

designated number. For example: dial *71 to forward all calls to

voicemail, and dial *71500 to forward all calls to number 500 (this

number does cont include prefix, if you are required to dial with

prefix, you need to configure it in Call Forwarding in Edit Extension

window).

Disable Forward All Calls

Dial this feature code to disable forwarding of all calls.

The default feature code is *071.

Enable Forward When Busy

Dial this feature code to forward calls to voicemail or a designated

number when busy. For example: dial *72 to forward calls to

voicemail when busy, and dial *72500 to forward all calls to

number 500 when busy (this number does cont include prefix, if

you are required to dial with prefix, you need to configure it in Call

Forwarding in Edit Extension window).

The default feature code is *72.

https://arttel.ru/

https://arttel.ru/shop/ip-ats/yeastar-s50

Содержание S-Series

































































































































Результаты поиска

Содержание S-Series

Отзывы:

Похожие инструкции для S-Series

Бренды по названию

Популярные бренды

Yeastar Technology S-Series, Руководство администратора

Результаты поиска

Содержание S-Series

Отзывы:

Похожие инструкции для S-Series

Бренды по названию

Популярные бренды