Yeastar Technology S-Series Скачать руководство пользователя страница 47

Страница: 47 / 128

S-Series IP PBX Administrator Guide

VoIP Trunk

Yeastar S-Series supports SIP and IAX protocols and provides 2 types of VoIP trunks:



VoIP trunk:

registration based VoIP trunk. A VoIP trunk requires S-Series to register with the

provider using an authentication name and password.



Peer To Peer:

IP based VoIP trunk. A

“Peer To Peer” VoIP trunk does not require S-Series to

that it knows where calls to your number should be routed.

Go to

Settings > PBX > Trunks

to add a VoIP trunk.

Please note that choosing different trunk protocol would have different settings.

1) Basic Settings

Table 5-8 SIP VoIP Trunk Configuration Parameters - Basic

SIP VoIP Trunk

Protocol

Set the trunk protocol

“SIP”.

Trunk Type

Choose the trunk type

“VoIP Trunk”.

Provider Name

Give this trunk a name to help you identify this trunk.

Hostname/IP

Service provider‟s hostname or IP address.
The default SIP port is 5060.

Domain

VoIP provider‟s server domain name. If the provider has no domain
name, fill in the IP address instead.

User Name

The username used to register to the trunk from the VoIP provider.

Password

The password to register to the trunk from the VoIP provider.

From User

All outgoing calls from the SIP trunk will use the From User (in this

case the account name for SIP Registration) in From Header of the

SIP Invite package. Keep this field blank if not needed.

Authentication Name

Used for SIP authentication. In most cases, it is the same with the

username.

Enable Outbound Proxy

A proxy that receives requests from a client. Even though it may not

be the server resolved by the Request-URI.

Outbound Proxy Server

Configure the address of outbound proxy server. The address can

be domain name or IP address.

Table 5-9 SIP Peer to Peer Trunk Configuration Parameters - Basic

SIP Peer-to-peer Trunk

Protocol

Set the trunk protocol as

“SIP”.

Trunk Type

Choose the trunk type

“Peer To Peer”.

Provider Name

Give this trunk a name to help you identify this trunk.

Hostname/IP

Service provider‟s hostname or IP address.
The default SIP port is 5060.

https://arttel.ru/

https://arttel.ru/shop/ip-ats/yeastar-s50

Содержание S-Series

































































































































Результаты поиска

Содержание S-Series

Отзывы:

Похожие инструкции для S-Series

Бренды по названию

Популярные бренды

Yeastar Technology S-Series, Руководство администратора

Результаты поиска

Содержание S-Series

Отзывы:

Похожие инструкции для S-Series

Бренды по названию

Популярные бренды