Yeastar Technology S-Series Скачать руководство пользователя

Страница: 49 / 128

S-Series IP PBX Administrator Guide

3) Advanced

Table 5-12 VoIP Trunk Configuration Parameters - Advanced

VoIP Settings

Qualify

Enable this to send SIP OPTIONS packet to SIP device to check if

the device is up.

Transport

Set the transport method used by the trunk.

T.38 Support

Whether to enable T.38 fax for the trunk.

DTMF Mode

Set the default mode for sending DTMF tones.



RFC4733: DTMF will be carried in the RTP stream in
different RTP packets than the audio signal



Info: DTMF will be carried in the SIP Info messages



Inband: DTMF will be carried in the audio signal



Auto: will attempt to detect if the device supports RFC4733
DTMF. If so, it will choose RFC4733; if not, it will choose

Inband.

RFC4733 is the default mode.

Other Settings

Enable DNIS

Dialed Number Identification Service is a telephone service that

enables a company to identify which telephone number was dialed.

Users could configure DNIS to allow the IP phones to display which

trunk is passing the call.

DID Number

This number is used to identify which line of the trunk is passing the

call.

DNIS Name

A name for this DNIS, when a call reaches the selected trunk, the

name will be displayed on the ringing phone.

Send Privacy ID

Check this checkbox to send privacy ID.

4) DOD

DOD (Direct Outward Dialing) means the caller ID displayed when dialing out. Before configuring

this, please make sure the provider supports this feature.



Global DOD

Configure Global direct outward dialing number. DOD (Direct Outward Dialing) is the caller

ID displayed when dialing out. Before configuring this, please make sure the carrier supports

this feature.



Add One DOD with Multiple Extensions

Enter one DOD number and select multiple extensions.

https://arttel.ru/

https://arttel.ru/shop/ip-ats/yeastar-s50

Содержание S-Series

































































































































Результаты поиска

Содержание S-Series

Отзывы:

Похожие инструкции для S-Series

Бренды по названию

Популярные бренды

Yeastar Technology S-Series, Руководство администратора

Результаты поиска

Содержание S-Series

Отзывы:

Похожие инструкции для S-Series

Бренды по названию

Популярные бренды