S-Series IP PBX Administrator Guide
102
Maintenance
This chapter describes system maintenance settings including the followings:
Upgrade
Yeastar S-Series provides automatic updates; new firmware file will be checked via a cloud server. In
addition, you can upgrade firmware manually. The system supports browsing firmware file from local
PC and supports HTTP method, TFTP method.
Go to
Maintenance
>
Upgrade
to do upgrade.
Note:
1.
If “Reset configuration to Factory Defaults” is enabled, the system will reset to factory default
settings.
2.
When update the firmware, please don‟t turn off the power. Or the system will get damaged.
3. If you are trying to upgrade through HTTP, please make sure that the system is able to visit the
Internet, or it cannot access Yeastar website to get the firmware file, causing the upgrade fail.
Automatic Upgrade
Figure 15-1 Automatic Upgrade
Never Check Updates
:
never check updates from the cloud server.
Check for Updates and let me choose whether to update
:
set when to do check the updates
automatically from the cloud server.
Check for updates and automatically install
: automatically downloads and installs firmware
updates without even asking.