Yealink W56P Telesystem, Руководство пользователя

Страница: 65 / 94

Troubleshooting
53
Placing External Calls
You can place external calls on the handset. External calls based on the public telephone
network require the use of SIP lines. Your system administrator needs to assign the SIP line to
the handset beforehand, and then assign the line to the handset as the outgoing line. For more
information on the outgoing line, refer to
Outgoing Lines on page 4456 .
Note
To place an external call via the handset:
1. Do one of the following:
- Enter the desired number using the keypad.
- Press to enter the pre-dialing screen.
Enter the desired number using the keypad.
If there are multiple lines assigned to your handset as outgoing lines, press the Line
soft key to select the desired line.
If you do not select a line, the handset uses the default outgoing line to dial out.
2. Press , or to dial out.
You can place at most two calls on your handset. You can also place an internal call during an
external call.
To place a new external call during an active call via the handset:
1. Do one of the following:
-
Press the New Call soft key.
Enter the desired number using the keypad.
Press
, or to dial out.
-
Press the Options soft key.
Select Directory, and then press the OK soft key.
Select the desired group, and then press the Enter soft key.
Select the desired contact.
Press , , or the Call soft key.
To place an internal call during an active call via the handset:
1. Press the Options soft key.
2. Select Intercom, and then press the OK soft key.
The handset must be subscribed and registered to the same base station to place a call. For
more information on registration, refer to
Handset Registration on page 24 .