Yealink W56P Telesystem, Руководство пользователя

Страница: 39 / 94

Basic Operations
27
You can configure a static IPv4 DNS for the IP phone. Before configuring it, make sure that the
IP mode is configured as
IPv4
To configure static IPv4 DNS manually via the handset:
1. Press to enter the main menu.
2. Select Settings->System Settings->Network (default PIN: 0000) ->Basic.
3. Press to select IPv4, and then press the OK soft key.
4. Press or to select Manual from the DNS Type field when DHCP is selected
from the IP Address Type field.
5. Enter the valid value in the Primary DNS and Secondary DNS field respectively.
6. Press the Save soft key to accept the change or the Back soft key to cancel.
The base station reboots automatically to make settings effective after a period of
time.
Checking System Status
You can view the system status on your handset. Available information of the system status
includes:

Base station status (IPv4 status or IPv6 status, firmware version, MAC address, device
certificate status, RFPI and network information)
-
IPv4 uses a 32-bit address.
-
IPv6 is an updated version of the current Internet Protocol to meet the
increased demands for unique IP addresses, using a 128-bit address.

Handset status (model, hardware version, firmware version, IPUI code, SN code and area)

Line status
Note
To check the base station status via the handset:
1. Press to enter the main menu.
2. Select Status->Base.
The LCD screen displays status information of the base station and the Network
option.
3. Press or to scroll through and view the status information.
4. Select Network, and then press the Enter soft key.
The LCD screen displays the connected network information.
To check the handset status via the handset:
1. Press to enter the main menu.
You can only check the handset status if the handset does not register to a base station.