Yealink One Talk CP960, Руководство администратора

Страница: 352 / 533

Call Features
349
Off Hook Answering Configuration
Off Hook Answering Configuration
The following table lists the parameter you can use to configure off hook answering.
Parameter features.off_hook_answer.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to answer an incoming call by picking up the handset, pressing the
Speakerphone key or pressing the HEADSET key directly.
Permitted
Values
0-Disabled, the user needs to press the corresponding line key, the Answer soft key or the OK key to
answer an incoming call after picking up the handset, pressing the Speakerphone key or pressing the
HEADSET key.
1-Enabled
Default 1
Supported
Devices
All phones except CP960
Auto Answer
Yealink phones support answering a SIP call or an IP address call automatically. Auto answer is configurable on a
per-line basis, while IP address call is not.
Topic
Auto Answer Configuration
Auto Answer Configuration
The following table lists the parameters you can use to configure the auto answer.
Parameter account.X.auto_answer
[1]
<MAC>.cfg
Description
It enables or disables auto answer a SIP call.
Note: The phone cannot automatically answer the incoming call during a call or while dialing even if
the auto answer is enabled.
Permitted
Values
0-Disabled
1-Enabled, the phone can automatically answer an incoming call.
Default 0
Web UI Account > Basic > Auto Answer
Phone UI Settings > Features > Auto Answer > Account X
Parameter account.X.auto_answer_mute_enable
[1]
<MAC>.cfg
Description
It enables or disables the auto answer mute feature.
Note: It works only if the values of parameters “account.X.auto_answer” and “features.allow_mute”
are set to 1 (Enabled). The value configured by this parameter takes precedence over that configured
by the parameter “features.mute.autoanswer_mute.enable”.
Permitted
Values
0-Disabled
1-Enabled, the phone will mute the microphone when an incoming call is automatically answered,
and then the other party cannot hear you.
Default 0