Yealink One Talk CP960, Руководство администратора

Страница: 118 / 533

Administrator’s Guide for VP59/SIP-T58A/CP960 IP Phones
115
Default -1
Supported
Devices
W53H, W56H
Handset UI OK > Settings > Display > Screen Saver
Handset Name
The handset will be assigned a name by default if successfully registered to the phone. You can personalize the
handset name.
Topic
Handset Name Configuration
Handset Name Configuration
The following table lists the parameter you can use to configure the handset name.
Parameter handset.X.name
[1]
<y0000000000xx>.cfg
Description
It configures the name of the handset.
Note: If it is set to blank, it will display the corresponding default handset name.
Permitted
Values
String within 24 characters
Default
For VP59, the handset name for handset 1 is VP59 Phone; for T58A, the handset name for handset 1
is T58 Phone.
The handset name for handset 2 is Handset 2.
The handset name for handset 3 is Handset 3.
The handset name for handset 4 is Handset 4.
The handset name for handset 5 is Handset 5.
Web UI
Status > Handset > Handset Name > Handset X
[1]
Phone UI
DECT Settings > Handsets > Handset X
[1]
Handset UI
W53H/W56H:
OK > Settings > Handset Name
DD Phone/CP930W:
Menu > Settings > Basic Settings > Phone Name
[1]
X is the handset ID. X=2-5.
Number Assignment
After the handset is registered to the phone, you can assign one or more outgoing lines or incoming lines for the
handset. For VP59, the phone acts as the Handset 1 (VP59 Phone); For T58A, the phone acts as the Handset 1
(T58 Phone).
The handset can only use the assigned outgoing line(s) to place calls. When multiple outgoing lines are assigned
to the handset, the handset uses the first line as the default outgoing line. You can change the default outgoing line
of the handset.
The handset can only receive incoming calls via the assigned incoming line(s). You can assign incoming lines to all
handsets that are registered to the same phone.