Account Settings
279
Values
phone assumes that the primary and secondary outbound proxy servers share registration inform-
ation. So the phone will directly send the requests to the secondary outbound proxy server.
1-Enabled, the phone will register to the secondary outbound proxy server first, and then send the
requests to it.
Default
-1, the phone will invoke “account.X.sip_server.Y.register_on_enable” to take effect.
Parameter account.X.outbound_proxy.Y.retry_counts
[1][2]
<MAC>.cfg
Description
It configures the retry times for the phone to resend requests when the outbound proxy server Y is
unavailable or there is no response from the outbound proxy server Y.
The phone moves to the next available outbound proxy server after three failed attempts.
Permitted
Values
Integer from 0 to 20
Default
-1, the phone will invoke “account.X.sip_server.Y.retry_counts” to take effect.
Parameter account.X.outbound_proxy.Y.only_signal_with_registered
[1][2]
<MAC>.cfg
Description
It enables or disables the phone to only send requests to the registered outbound proxy server when
encountering a failover.
Note: It works only if “account.X.outbound_proxy.Y.register_on_enable” is set to 1 (Enabled) and
“account.X.outbound_proxy.Y.failback_mode” is set to 1, 2 or 3.
Permitted
Values
0-Disabled
1-Enabled
Default
-1, the phone will invoke “account.X.sip_server.Y.only_signal_with_registered” to take effect.
Parameter account.X.outbound_proxy.Y.invite_retry_counts
[1][2]
<MAC>.cfg
Description
It configures the number of retries attempted before sending requests to the next available outbound
proxy server when encountering a failover.
Permitted
Values
Integer from 1 to 10
Default
-1, the phone will invoke “account.X.sip_server.Y.invite_retry_counts” to take effect.
Parameter account.X.outbound_proxy.Y.failback_mode
[1][2]
<MAC>.cfg
Description
It configures the failback mode for the phone to retry the primary outbound proxy server in failover.
Note: DNSTTL, Registration and duration mode can only be processed when the IP phone is idle (that
is, no incoming/outbound calls, no active calls or meetings, and so on).
Permitted
Values
0-newRequests: all requests are sent to the primary outbound proxy server first, regardless of the last
server that was used. If the primary outbound proxy server does not respond correctly, the phone will
try to send requests to the secondary outbound proxy server.
1-DNSTTL: the phone will send requests to the last registered outbound proxy server first. If the TTL
for the DNS A records on the registered outbound proxy server expires, the phone will retry to send
requests to the primary outbound proxy server.
2-Registration: the phone will send requests to the last registered outbound proxy server first. If the
registration expires, the phone will retry to send requests to the primary outbound proxy server.
3-duration: the phone will send requests to the last registered outbound proxy server first. If the time
defined by the parameter “account.X.outbound_proxy.Y.failback_timeout” expires, the phone will retry
to send requests to the primary outbound proxy server.
Default
-1, the phone will invoke “account.X.sip_server.Y.failback_mode” to take effect.
Parameter account.X.outbound_proxy.Y.failback_timeout
[1][2]
<MAC>.cfg
Description It configures the timeout (in seconds) for the phone to retry to send requests to the primary outbound
Содержание One Talk CP960
Страница 1: ......
