Yealink One Talk CP960, Руководство администратора

Страница: 367 / 533

Administrator’s Guide for VP59/SIP-T58A/CP960 IP Phones
364
Parameter features.allow_mute <y0000000000xx>.cfg
Description It enables or disables the allow mute feature for the IP phone.
Permitted
Values
0-Disabled
1-Enabled, you are allowed to mute an active call or activate the mute feature on the pre-dial-
ing/dialing/calling/ringing screen.
Default 1
Web UI Features > General Information > Allow Mute
Parameter features.dect_mic.mute.mode <y0000000000xx>.cfg
Description
It configures the mute mode for the phone and the registered Wireless Expansion Mic/connected
Wired Expansion Mic.
Permitted
Values
0-Synchronous mode, the mute/unmute states on the expansion microphone and on the phone are
synchronous. When the phone is in a call, you can mute the call on the phone or on the expansion
microphone.
1-Standalone mode, the mute/unmute states on the expansion microphone and on the phone are
mutually independent. When the phone is in a call, you can mute the phone and the expansion micro-
phone together by tapping All mute on the phone, mute the phone only by tapping Mute on the
phone, or mute the expansion microphone only by tapping the mute button on the expansion micro-
phone.
Note: It is not available when using CP960 star connection feature.
Default 0
Supported
Devices
CP960
Phone UI Settings > Wireless Microphone > Synchronous mode/Standalone mode
Keep Mute
Keep mute, also known as persistent mute, allows you to keep the mute state persisting across calls.
In a call center or meet room, if incoming calls are answered automatically, the callers may hear the local dis-
cussion. Therefore, you can mute the phone in an idle state to prevent the unintended situation. The mute state per-
sists across calls until you unmute the microphone manually or until the phone restarts.
You can activate the mute feature by pressing the MUTE key in idle/pre-dialing/dialing/ringing/calling/talking state.
Topic
Keep Mute Configuration
Keep Mute Configuration
The following table lists the parameter you can use to enable or disable keep mute.
Parameter features.keep_mute.enable <y0000000000xx>.cfg
Description
It configures the keep mute feature.
Note: It works only if “features.allow_mute” is set to 1 (Enabled).
Permitted
Values
0-The mute feature is automatically deactivated when the active call ends.
1-The mute state is kept until you change the mute state manually or the phone restarts.
Default
0 (for VP59/T58A)
1 (for CP960)