Yealink CPE80, Руководство администратора

Страница: 89 / 321

Configuring Network
73
TLV Type TLV Name Description
Asset ID Assertion identifier of the endpoint.
Parameters of LLDP feature on the endpoint are described below.
Parameter Description Configuration Method
LLDP
->
Active
Enables or disables LLDP feature on
the endpoint.
Default:
Enabled
Note
: If you change this parameter,
the endpoint will reboot to make the
change take effect.
Remote Control
Web User Interface
Packet
Interval(1-3600s)
Configures the interval (in seconds)
for the endpoint to send LLDP
requests.
Default:
60
Note
: If you change this parameter,
the endpoint will reboot to make the
change take effect.
Remote Control
Web User Interface
To configure LLDP via web user interface:
1.
Click on
Network
->
Advanced
.
2.
In the
LLDP
block, select the desired value from the pull-down list of
Active
.
3.
Enter the desired time interval in the
Packet Interval (1-3600s)
field.
4.
Click
Confirm
to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
5.
Click
Confirm
to reboot the endpoint immediately.