Yealink CPE80, Руководство администратора

Страница: 302 / 321

Administrator’s Guide for Yealink VC110 Video Conferencing Endpoint
286
Viewing Call Statistics
You can enter the view call statistics screen during an active call. Information includes:

Total Bandwidth:
Uplink Bandwidth and Downlink Bandwidth.

Video
: Resolution, Codec, Bandwidth, Frame Rate, Jitter, Total Packet Lost, Packet Lost(%).

Protocol used during a call.

Device information of the far site.

Audio:
Codec, Bandwidth, Sample Rate, Jitter, Total Packet Lost, Packet Lost(%)

Share:
Resolution, Codec, Bandwidth, Frame Rate.
Use the remote control to select
More
->
Call Statistics
during an active call to view call
statistics.
Using Diagnostic Methods
The endpoint supports the following diagnostic methods:

Audio Diagnose
: Check whether the audio input device and audio output device are
working properly.

Camera Diagnose
: Check whether the camera can pan and change focus normally.

Ping
: Check whether the endpoint can establish contact with the IP address that you
specify.

Trace Route
: Display the route (path) and measure transit delays of packets across an
Internet Protocol (IP) network.
Above diagnostic methods can be configured using remote control. Ping and Trance Route can
also be configured via web user interface.
To diagnose audio via the remote control:
1.
Select
Menu
->
Diagnose
menu.
2.
Select
Audio Diagnose
, and then press .
3.
Speak into the microphone.
4.
Check whether the microphone can pick up audio and play back the audio properly.
If the endpoint plays back the audio normally, it means that audio works well.
5.
Press to stop audio diagnostics.
To diagnose the camera via the remote control:
1.
Select
Menu
->
Diagnose
menu.
2.
Select
Camera Diagnose
, and then press .
3.
Press navigation keys to adjust the camera position.