HTTPS://WWW.ELECTROPOLIS.ES
22
English
Inversion Table Assembly Instructions Yatek ECO
STEP 6:
In this step we are going
to join the assembled
piece in step 5 with the
right and left handles.
First make sure to grab
the following parts for this
step:
•
Assembled piece in
step 5
•
2 x Nº 10
–
Left and
right handlebars
•
4 x Nº 14
–
Hexagonal bolt
•
8 x Nº 15
–
Flat
washer
•
4 x Nº 18
–
Anti-
release nut
➢
First step:
Use the hexagonal bolts (14), the flat washers (15) and nuts (18) to assemble
both handlebars (10) in the back support (2) according to the direction in the illustration.
➢
Second step:
During the use, after holding the feet, insert the safety pin (21) in the hole of
the rotating toothed disc (to ensure the feet holder).
