MOTO
MAN
B-1
MH-Series Positioner Manual with MotoMount
APPENDIX B
ILLUSTRATED PARTS LIST
B.1
Introduction
The Illustrated Parts List identifies, describes, and illustrates detail parts of the
main assemblies for the MH-Series positioner manufactured by Motoman.
This list provides parts identification and descriptive information for use in
provisioning, requesting, purchasing, storing, and issuing spare parts.
Contents
The parts list contains a breakdown of the equipment into detail parts. All parts of
the equipment are listed except the following:
1. Standard hardware items (attaching parts) such as nuts, screws, washers, etc.,
which are available commercially.
2. Bulk items such as wire, cable, sleeving, tubing, etc., which are also
commercially available.
3. Permanently attached parts which lose their identity by being welded,
soldered, riveted, etc., to other parts, or assemblies.
Parts List
This table is divided into four columns as follows:
1. “Figure - Item Number” Column
This column lists the figure number of the illustration applicable to a
particular parts list and also identifies each part in the list by an item number.
These item numbers also appear on the illustration. Each item number on the
illustration is connected to the part to which it pertains by a leader line and
arrow. Thus, the figure and item numbering system ties the parts list to the
illustrations and vice versa
2. “Motoman Part Number” Column
All part numbers appearing in this column are Motoman part numbers.
3. “Description” Column
The item nomenclature appears in this column.
4. “QTY” Column
This column indicates the quantity of parts required for an assembly or
subassembly in which the part appears. This column does not necessarily
reflect the total used in the complete end item.
