2.1 A: Initialization
YASKAWA ELECTRIC
TOEP C710687 03B FSDrive-MV1000 Parameter Guide
99
u
A2: User Parameters
n
A2-01 to A2-32: User Parameters 1 to 32
The user can select up to 32 parameters and assign them to parameters A2-01 through A2-32 frequently adjusted to
provide quicker access by eliminating the need to scroll through multiple menus. The User Parameter list can also track
the most recently edited settings and save those parameters to this list.
Table 2.5 Parameter Registered as User Parameters (A2-01 to A2-32) (Default Setting)
Saving User Parameters
To save specific parameters to A2-01 through A2-32, set parameter A1-02 to 2 to allow access to all parameters, then
enter the parameter number to one of the A2-
parameters to assign it to the list of User Parameters. Finally, set A1-01
to 1 to restrict access so users can only set and refer to the parameters saved as User Parameters.
n
A2-33: User Parameter Automatic Selection
Determines whether recently edited parameters are saved to the second half of the User Parameters (A2-17 to A2-32) for
quicker access.
Setting 0: Do not save list of recently viewed parameters
Set A2-33 to 0 to manually select the parameters listed in the User Parameter group.
Setting 1: Save history of recently viewed parameters
By setting A2-33 to 1 to automatically save recently edited parameters A2-17 through A2-32. A total of 16 parameters
are saved with the most recently edited parameter set to A2-32, the second most recently to A2-31, and so on.
No.
Name
Setting Range
Default
A2-01 to A2-32
User Parameters 1 to 32
b1-01 to o4-
0
A2-
Default
Name
A2-
Default
Name
A2-01
A1-02
Control Method Selection
A2-17
E2-01
Motor Rated Current
A2-02
b1-01
Frequency Reference Selection 1
A2-18
E2-04
Number of Motor Poles
A2-03
b1-02
Run Command Selection 1
A2-19
E2-11
Motor Rated Power
A2-04
b1-03
Stopping Method Selection
A2-20
H4-02
Analog Output 1 Gain
A2-05
C1-01
Acceleration Time 1
A2-21
H4-12
Analog Output 2 Gain
A2-06
C1-02
Deceleration Time 1
A2-22
H4-22
Analog Output 3 Gain
A2-07
d1-01
Frequency Reference 1
A2-23
H4-32
Analog Output 4 Gain
A2-08
d1-02
Frequency Reference 2
A2-24
L1-01
Motor Overload Protection Selection
A2-09
d1-03
Frequency Reference 3
A2-25
L3-04
Stall Prevention during Deceleration
A2-10
d1-04
Frequency Reference 4
A2-26
–
–
A2-11
d1-17
Jog Frequency Reference
A2-27
–
–
A2-12
E1-04
Maximum Output Frequency
A2-28
–
–
A2-13
E1-05
Maximum Voltage
A2-29
–
–
A2-14
E1-06
Base Frequency
A2-30
–
–
A2-15
E1-09
Minimum Output Frequency
A2-31
–
–
A2-16
E1-13
Base Voltage
A2-32
–
–
No.
Name
Setting Range
Default
A2-33
User Parameter Automatic Selection
0 or 1
0
MV1000ParameterGuide_E_conditional.book 99 ページ ２０１３年１０月１１日 金曜日 午後８時１８分
