YASKAWA CIMR-MC5A20P4, Инструкция по эксплуатации, Страница: 115 / 294

Basic Operation
6.1.7 Selecting the Stopping Method: b1-03
- 12
6.1.7 Selecting the Stopping Method: b1-03
D
Set the stopping method used when a stop command is input.
User
Change
during
Setting Factory
Valid Access Levels
User
Constant
Number
Name
during
Opera-
tion
Setting
Range
Unit
Factory
Setting
Open Loop
Vector
Flux Vector
b1-03
Stopping method selec-
tion
0 -- 0 Q Q
D
Settings
Setting Function
0 Deceleration to stop
D
The following diagrams show the operation of the stopping method.
x
Deceleration to Stop (b1-03 = 0)
Run command
ON OFF
Output frequency
Deceleration
time
DC injection braking
Excitation level (b2-01)
DC injection braking time at stop (b2-04)
Decelerates to a stop at a rate set with the selected deceleration time.
Fig
6.4
Deceleration to Stop
6.1.8 Multi-function Input Settings: H1-01 through H1-06
D
Set the functions for terminals 3 to 8. Set the functions of the multi-function inputs according to the
application.
User
Change
during
Setting Factory
Valid Access Levels
User
Constant
Number
Name
during
Opera-
tion
Setting
Range
Unit
Factory
Setting
Open Loop
Vector
Flux Vector
H1-01
Multi-function input 1
(terminal 3)
0 to 77 -- 24 B B
H1-02
Multi-function input 2
(terminal 4)
0 to 77 -- 14
B B
H1-03
Multi-function input 3
(terminal 5)
0 to 77 -- 3 (0) B B
H1-04
Multi-function input 4
(terminal 6)
0 to 77 -- 4 (3) B B
H1-05
Multi-function input 5
(terminal 7)
0 to 77 -- 6 (4) B B
H1-06
Multi-function input 6
(terminal 8)
0 to 77 -- 8 (6) B B
D
The default settings in parentheses are the default values when the Unit is initialized for 3-wire se-
quence control.
D
The constant settings that are used most often are explained below. Refer to chapter NO TAG Advanced
Operation or the constant tables for details on the other settings.
S 3-wire sequence (forward/reverse run command): Set “0”
S
Multi-step sped references 1 to 3 and jog command: Set “3” to “6”
S Acceleration/Deceleration Time Selectors 1 and 2: Set “7” and “1A”
S Emergency Stop: Set “15”
S
FORWARD and REVERSE JOG References:
Set “12” and “13”
S Terminal 13/14 Switch: Set “1F”
6