YASKAWA CIMR-MC5A20P4, Инструкция по эксплуатации, Страница: 111 / 294

Basic Operation
6.1.3 Frequency Reference from Digital Operator: b1-01, o1-03, d1-01 to d1-09
- 8
J Preset Frequency Reference Values: d1-01 through d1-09
User
Change
during Setting Factory
Valid Access Levels
User
Constant
Number
Name
during
Opera-
tion
Setting
Range
Unit
Factory
Setting
Open Loop
Vector
Flux Vector
d1-01 Frequency reference 1 0 to 400.00 o1-03 0.00 Hz Q Q
d1-02 Frequency reference 2 0 to 400.00 o1-03 0.00 Hz Q Q
d1-03 Frequency reference 3 0 to 400.00 o1-03 0.00 Hz Q Q
d1-04 Frequency reference 4 0 to 400.00 o1-03 0.00 Hz Q Q
d1-05 Frequency reference 5 0 to 400.00 o1-03 0.00 Hz B B
d1-06 Frequency reference 6 0 to 400.00 o1-03 0.00 Hz B B
d1-07 Frequency reference 7 0 to 400.00 o1-03 0.00 Hz B B
d1-08 Frequency reference 8 0 to 400.00 o1-03 0.00 Hz B B
d1-09 Jog frequency reference 0 to 400.00 o1-03 6.00 Hz Q Q
D
The units for these values are set in o1-03.
D
The frequency reference default value and set value will change when o1-03 is changed.
For example, if preset reference 1 is set to 6.00 Hz and o1-03 is changed to 1 (0.01% units), the setting
for preset reference 1 will become 10.00%.
D
When using preset references 2 through 8, be sure to set multi-step speed references 1, 2, and 3 in the
multi-function inputs (H1-01 through H1-06) as required.
D
When using the jog function, set the jog frequency reference in constant d1-09. When jogging from
an external terminal, set the multi-function inputs (H1-01 through H1-06) to “Jog Frequency Refer-
ence,” “Forward Jog,” or “Reverse Jog” as required.
D
The multi-function input setting is unnecessary when jogging from the Operator.
6