Yardline FAIRFIELD GABLE 10 x 10, Руководство пользователя

Страница: 15 / 78

13
Move to the opposite side. Using the long edge of the panel as a lever, move thepanel side-to-side until the top
corner is flush to the floor frame (Fig. B) .
Secure panel using two 2" nails in the corners.
2
BEGIN
1
3
4
Continue attaching the panel using 2" nails 6" apart on edges and 12" apart inside panel.
Use a chalk line or use pre-painted grid lines to nail into joists under panel.
Check that the floor frame is square by measuring diagonally across the frame corners. If the measurements are
the same your floor frame is square. The measurement will be approximately 167-5/16" (425 cm).
Attach the 48 x 96" panel with the 48" edge and corner flush to the outside of the floor frame (Fig A)
and 3/4" along the floor joist. Use the GAA gauge block for the 3/4" measurement.
Secure panel using two 2" nails in the corners.
PARTS REQUIRED:
x1
5/8 x 48 x 96"
(1,6 x 121,9 x 243,8 cm)
x53
2" (5,1 cm)
FLOOR PANELS
Fig. B
Fig. A
3/4"
(1,9 cm)
2 Nails
2 Nails
Ensure your wall frame is square by installing one panel and squaring frame.
Install panels with rough side up (painted grid lines).
3/4" GAUGE
BLOCK
Grid lines up
5/8 x 48 x 96"
(1,6 x 122 x 243,8 cm)
3/4"
GAUGE
BLOCK
For squareness maintain 3/4"
measurement along panel edge.
3/4"
(1,9 cm)
6"
(15,2 cm)
12" (30,5 cm)
120"
(304,8) cm)
DOOR
Flush
GAUGE
BLOCK
Flush
Flush