Yanmar i8350, Руководство по эксплуатации

Страница: 11 / 28

© Yanmar 2008 Page 9
Electronic Control System:
Operation Manual for SY Series Engines with GEN III Controls
Power Train Sync (PTS):
Automatically synchronizes engines and transmissions; the port
lever controls throttle and shift of both engines across the entire
control range.
A lit
red
SYNC lamp indicates sync is engaged.
to EnGAGE Pts:
•
Press SYNC button. ( Red lamp flashes.)
•
Match control handle positions within 5% of each other.
( Red lamp goes steady when levers match — power trains
are now in sync.)
to DIsEnGAGE Pts:
•
Press SYNC button. ( Red lamp flashes.)
•
Match control handle positions within 5% of each other.
( Red lamp goes off when levers match — power train sync
is now disengaged.)
Sync Operations:
notE: Your system ships with Cruise Sync set as the default.
Power Train Sync may be selected using the i5601E display.
Cruise Sync (CS): Default
Automatically synchronizes engine RPMs when levers are
close together and above 20% forward throttle.
A lit red SYNC lamp indicates sync is enabled.
TO ENABLE CS:
•
Press SYNC button. ( Red lamp flashes.)
•
Match control handle positions within 5% of each other.
(Red lamp goes steady when levers match — CS is now
enabled.)
Cs AUtoMAtIC EnGAGEMEnt:
•
When levers are moved within 10% of each other and over
20% forward throttle.
Cs AUtoMAtIC DIsEnGAGEMEnt:
•
When levers are moved more than 10% apart or under 20%
forward throttle.
TO DISABLE CS:
•
Press SYNC button. (
Red
lamp flashes.)
•
Match control handle positions within 5% of each other.
(
Red
lamp goes off when levers match — cruise sync is
now off.)
Operation
note: starboard lever may be
chosen as master control using
the i5601E