Yanmar i8350, Руководство по эксплуатации

Страница: 17 / 28

© Yanmar 2008 Page 15
Electronic Control System:
Operation Manual for SY Series Engines with GEN III Controls
Appendix A
The i5601E was set up at the factory with the keys assigned and locked as shown on page 4 of this manual. This
mode is the default mode and allows start up and operation of the engine. It serves many applications quite well.
The i5601E Digital Display unit has many additional features and capabilities. This section of the book shows
the use of some of these features.
Changing the basic set up is typically accomplished in one of two ways.
1. Go to the systems menu and alter basic selections
2. Enable the right arrow key (5) on the basic screens to allow changing of the data shown in the default
displays.
To enter the Main Menu press and hold key 5 until the menu appears.
To move around the menus use the softkeys at the bottom of the screen.
The function of a particular softkey changes from screen to screen to
whatever is most appropriate for the given screen.
Keys 1 2 3 4 5
i5601E Digital Display Setup
NOTE: Any changes to the setup menus may require reconfiguring the i5601E HOT KEY SETUP.