Yanmar CL Series, Руководство оператора

Страница: 27 / 48

6-5
6. OPERATE THE LOADER
CL600 Operator's Manual
■
Operate with a Float Control
When operating on a hard surface, keep the bucket
level and place the implement control lever in the
float position. The preceding operation makes the
bucket float on the working surface.
■ Load from a Bank
Always maintain a safe forward speed. Only apply
the required level of momentum and force for the
particular operation.
Building a ramp in order to access the pile is also an
option that can be used with large piles.
NOTE
●
Exerting hydraulic down pressure on the bucket
causes the bucket to wear out more quickly than
normal.
●
Allowing the bucket to float prevents the mixing
of surface material with the stockpile material.
The float position reduces the chance of surface
gouging when removing snow or other similar
materials.
2021713
FLOAT
SURFACE MATERIAL
2021713
2022030
To prevent serious personal injury or death:
● Exercise caution when undercutting high
banks.
●
Dirt slides can be dangerous.
●
Load from as low as possible for maximum
efficiency.
●
The loader lift and breakaway capacity
diminish as the loading height is increased.
NOTE
Always keep the bucket as low as possible.
●
Cut down the sides of the pile first when:
• working on a high pile
• danger of the dirt slides on the cave-ins is
present
●
Under cut the top of high pile. The preceding
action requires less strength.
● When performing the preceding procedure,
ensure that the width of the wheels is not greater
than the width of the bucket.
! WARNING
202031
2022032
2022033