1
Ⅰ． PRECAUTIONS
INTRODUCTION
Thank you very much for purchasing of "MANOSTAR SWITCH MS65, MS65F".
!
Caution
To ensure your safety in using this instrument :
・ Be sure to read the instruction manual carefully before using the instrument so that you
can use it properly.
Wrong use may result in failure of the instrument and lead to its damage and accident. This
manual should be kept in a proper place so that you can refer to it any time you need.
!
Warning
・ Do not use this instrument where fl ammable gas is present.
The instrument is not explosion-proof. Do not use the instruments in the circumstance where
fl ammable gas is present. It may cause explosion.
・ Do not use the instrument at the place where corrosive gas is present.
The instrument is not corrosion resistance construction. Measuring corrosive gas may corrode the
receiving element and housing material of the instrument. It is expected that corrosive gas leaked out
of the instrument will harm a person.
・ Do not apply the pressure to the instrument more than it can withstand.
The diaphragm and the retainer are broken if the pressure exceeding withstanding pressure of the
pressure receiving element is applied to the instrument. The case body of the instrument is broken if
the pressure exceeding withstanding pressure of the instrument body is applied to the instrument.
・ The instrument is measurable for air and non-corrosive gas only.
The machine is exclusive use of dry air (90％ RH or less). Using measuring the water or oil it may be
damaged and causes the accident.
・ Avoid using where the instrument is subject to many vibration and impact.
Using the instrument where intensifi ed vibration and impact may be damaged the instrument. It is
expected that gas leaks of the instrument which harms a parson.
・ Do not exceed rated voltage in using.
Using the instrument by exceeding rated voltage may cause fi re or electric shock.
・ Wire correctly.
Incorrect wiring may cause fi re.
・ Do not exceed rated surrounding temperature, humidity and altitude in use.
Using the instrument by exceeding rated surrounding temperature and humidity and altitude it may be
damaged and cause the accident.
・ Do not disassemble or reconstruct the instrument.
It may void the warranty.
!
Caution
・ As to where to install and how to install this instrument, be sure to follow the instruction manual
provided so as to ensure a proper method.
・ Use the instrument indoors.
・ In case of not being installed in dry and well-kept clean locations, the instrument must be enclosed in
box of min. Protection degree IP54.
・ Do not use organic solvent for cleaning.
Use a cloth soaked with water-diluted neutral detergent to wipe the surface of a product. Using of
organic solvent causes damage on the surface.
・
Dropping the product
If the product is dropped onto a desk or fl oor, not only its exterior but also interior mechanism is
broken.
