Yamaha YZ125(R)/LC, Руководство по эксплуатации для владельца

Страница: 448 / 568

5-44
CHAS
HANDLEBAR
10. Install:
9 Bolt (grip cap)
1
w
9 Install the grip cap so that the gaps
a a
and
b b
between the bolt (grip cap) and brake
lever
2 2
are equal. If you make a mistake in
the grip cap installation position, the brake
lever may contact the grip cap, resulting in
poor brake performance.
9 After tightening the bolts, check that the
throttle grip
3 3
moves smoothly. If it does
not, retighten the bolts for adjustment.
11. Install:
9 “ENGINE STOP” button
1
9 Clutch lever holder
2
9 Bolt (clutch lever holder)
3
9 Clamp
4
NOTE:
9 The “ENGINE STOP” button, clutch lever hold-
er and clamp should be installed according to
the dimensions shown.
9 Pass the “ENGINE STOP” button lead in the
middle of the clutch holder.
12. Install:
9 Clutch cable
1
NOTE:
Apply the lithium soap base grease on the clutch
cable end.
13. Adjust:
9 Clutch lever free play
Refer to “CLUTCH ADJUSTMENT” section in
the CHAPTER 3.
4 Nm (0.4 m•kg, 2.9 ft•lb)
4 Nm (0.4 m•kg, 2.9 ft•lb)