Yamaha YFZ45YSSH Скачать руководство пользователя страница 75 | Manualshive

Страница: 75 / 154

Yamaha YFZ45YSSH Скачать руководство пользователя страница 75

7-8

7

next to other hot parts. Check under the vehicle
after operating in areas where combustible mate-
rials may have collected. Do not idle or park the
vehicle in long dry grass or other dry ground cov-
er.
To prevent burns, avoid touching the exhaust sys-
tem. Park the ATV in a place where pedestrians or
children are not likely to touch it.

BE CAREFUL WHERE YOU RIDE

This ATV is designed for use on unpaved surfaces
only.

WARNING! Paved surfaces may seriously

affect handling and control of the ATV, and
may cause the ATV to go out of control. Always
avoid paved surfaces, including sidewalks,
driveways, parking lots and streets.

[EWB01512]

While riding on unpaved public streets or roads
may be legal in your area, such operation can in-
crease the risk of collision with other vehicles.

UBW260E0.book Page 8 Thursday, May 12, 2016 2:28 PM

«
...
73
74
75
76
77
...
»

Содержание YFZ45YSSH



























































































































































Отзывы:

Нет отзывов