Yamaha YFZ45YSSH Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 154

Yamaha YFZ45YSSH Скачать руководство пользователя страница 70

7-3

7

the time to learn the basic techniques well before
attempting more difficult maneuvers. Become fa-
miliar with this ATV at slow speeds first, even if you
are an experienced operator.

Not recommended for children under 16 years
of age.

WARNING

EWB01391

A child under 16 should never operate an ATV
with engine size greater than 90 cc. Use by
children of ATVs that are not recommended for
their age can lead to severe injury or death of
the child.

This ATV is designed to carry the operator only
– passengers prohibited.

The long seat is to allow the operator to shift posi-
tion as needed during operation. It is not for carry-
ing passengers.

WARNING! Never carry a

passenger. Carrying a passenger on this ATV
greatly reduces your ability to balance and
control this ATV. You could have an accident,
resulting in severe injury or death to you and/or
your passenger.

[EWB01402]

UBW260E0.book Page 3 Thursday, May 12, 2016 2:28 PM

«
...
68
69
70
71
72
...
»

Содержание YFZ45YSSH



























































































































































Отзывы:

Нет отзывов