16
Tyros4 Reference Manual
The Organ Flutes Voices selected from the [ORGAN FLUTES] button can be edited by
adjusting the footage levers, adding the attack sound, applying effect and equalizer, etc.
FOOTAGE Page
Refer to the Owner’s Manual, chapter 1.
VOLUME/ATTACK Page
EFFECT/EQ Page
Same parameters as in the VOICE SET “EFFECT/EQ” Page explained on
Editing Organ Flutes Parameters
After editing, go to the Voice
Selection display by pressing the
[I] (PRESETS) button and save the
setting. The settings will be lost if
you select another Voice or turn
the power to the instrument off
without executing the Save opera-
tion.
NOTICE
Same as the
FOOTAGE Page.
[1
]
VOL (Volume)
Adjusts the overall volume of the Organ Flutes. The longer the graphic bar, the greater
the volume.
[2
]
RESP (Response)
Affects both the attack and release (
) portion of the sound, increasing or
decreasing the response time of the initial swell and release, based on the FOOTAGE
controls. The higher the value, the slower the swell and release.
[3
]
VIBRATO
SPEED
Determines the speed of the vibrato effect controlled by the Vibrato On/Off ([F]/[G]
buttons) and Vibrato Depth ([H] button).
[4
]
MODE
The MODE control selects between two modes: FIRST and EACH. In the FIRST
mode, attack (percussive sound) is applied only to the first notes played and held
simultaneously; while the first notes are held, any subsequently played notes have no
attack applied. In the EACH mode, attack is applied equally to all notes.
[5
]–
[7
]
4’, 2 2/3’, 2’
These determine the attack sound volume of the ORGAN FLUTES Voice. The 4’, 2-
2/3’ and 2’ controls increase or reduce the volume of attack sound at the correspond-
ing footages. The longer the graphic bar, the greater the attack sound volume.
[8
]
LENG (Length)
Affects the attack portion of the sound producing a longer or shorter decay immedi-
ately after the initial attack. The longer the graphic bar, the longer the decay.
