98
Tyros4 Reference Manual
This section explains briefly how to create your own Vocal Harmony types, and lists the
detailed parameters for editing. A sum total of sixty types (Vocal Harmony and Synth
Vocoder types) can be created and saved.
1
Press the [VH TYPE SELECT] button to call up the Vocal Har-
mony Type Selection display.
2
Use the TAB [
][
] buttons to select the Vocal Harmony tab.
3
Select a Vocal Harmony type to be edited by using the [A]–[J]
buttons.
To call up the other display pages for further selections, press one of the [1
]–[5
] buttons or press the [VH TYPE SELECT] button again.
4
Press the [8
] (EDIT) button to call up the Vocal Harmony Edit
display.
5
Use the TAB [
][
] buttons to call up the desired tab, then edit
the Vocal Harmony by using [A]–[G] buttons and [1
]–[8
] buttons or sliders.
There are three tabs in the Vocal Harmony Edit display; refer to
editing each tab.
•
OVERVIEW
........... Edits basic parameters for Vocal Harmony type, including
mode, Chordal Type and Vocal Effect, etc.
•
PART
...................... Adjusts volume and panning, etc. for each part.
•
DETAIL
.................. Detailed editing for Vocal Harmony type.
6
Press the [I] (SAVE) button to save your edited Vocal Harmony
type.
Editing the Vocal Harmony Types
For information on “Editing the Synth
Vocoder Types,” refer to
NOTE
3
2
3
4
5
6
5
The settings here will be lost if
you change to another Vocal Har-
mony type or you turn the power
off without executing the save
operation.
NOTICE
