Tyros4 Reference Manual
109
9
M
ixing Console
– Editi
ng the V
o
lume and
To
nal Balance
–
Selecting an Effect type
1
Press the [F] (TYPE) button in the EFFECT Page of the Mixing
Console display.
The Effect Type Selection display is called up.
2
Use the [1
]/[2
] buttons to select the effect BLOCK.
3
Use the [3
]/[4
] buttons to select the part to which you
want to apply the effect.
Please note that a category cannot be selected if REVERB, CHORUS or DSP1 is
the selected block.
4
Use the [5
]/[6
] buttons to select the effect CATEGORY.
Please note that a category cannot be selected if REVERB is the selected block.
5
Use the [7
]/[8
] buttons to select the effect TYPE.
If you want to edit the effect parameters, go on to the next operation.
Editing EFFECT Parameters
2
3
4
5
When the “Connection” parameter of the
DSP1 (selected on step 3 of “Editing
and Saving the effect” section on
) is set to “System,” the DSP1
effect will be applied overall to the Style
and Song. When it is set to “Insertion,”
the DSP1 effect will behave as same as
other DSP blocks and be applied to only
the part(s) selected in step 3.
NOTE
Effect
Block
Effect-applica-
ble parts
Effect characteristics
REVERB
All parts
Reproduces the warm ambience of playing in a
concert hall or jazz club.
CHORUS
All parts
Produces a rich, “fat” sound as if several parts are
being played simultaneously. In addition, other
type effects (such as reverb, delay, etc.) can also
be selected in this effect block.
DSP1
STYLE PART,
SONG CHAN-
NEL 1–16
This effect is applied only to Style/Song parts.
DSP2,
DSP3,
DSP4,
DSP5,
DSP6
RIGHT 1,
RIGHT 2,
RIGHT 3,
LEFT, SONG
CHANNEL 1–16
Any unused DSP blocks are automatically
assigned to the appropriate parts (channels) as
needed. One DSP block is available only for one
of the keyboard parts or Song parts.
DSP7
Microphone
sound, SONG
CHANNEL 1–16
This effect is applied to the MIC input (in addition
to the Vocal Harmony effect)/Song parts.
DSP8,
DSP9
STYLE PART
These effects are applied only to Style parts.
