110
Tyros4 Reference Manual
Editing and Saving the effect
1
Press the [F] button to call up the display for editing the effect
parameters.
2
If you have selected one of the DSP2–9 effect blocks in step 2
of the section “Selecting an Effect type.”
You can edit its standard parameters as well as its variation parameter.
To select the standard type of parameters, press the [B] button. To select its varia-
tion parameter, press the [E] button.
3
Select one of the parameters you want to edit by using the
[4
]/[5
] buttons, then adjust the value by using the
[6
]/[7
] buttons.
If you have selected the REVERB, CHORUS or DSP1 effect block in step 2, you
can adjust the Effect Return Level by pressing [8
] button.
To re-select the Effect block, category and type, use the [1
]–[3
] buttons.
The re-selected effect configuration is displayed at the upper left side box in the
display.
“Variation parameter” is the one which
can be turned on/off by pressing the
[VARIATION] button on the panel.
NOTE
2
4
3
Keep in mind that in some cases noise
may result if you adjust the effect
parameters while playing the instru-
ment.
NOTE
NEXT PAGE
