Tyros4 Reference Manual
113
9
M
ixing Console
– Editi
ng the V
o
lume and
To
nal Balance
–
Editing and Saving the Selected Master EQ
1
Press the [F] (EDIT) button in the EQ Page of the Mixing Con-
sole display.
The MASTER EQ EDIT display is called up.
2
Use the [A]/[B] buttons to select a preset EQ type.
The set parameters of the selected EQ type are automatically shown at the bottom
of the display.
3
Use the [3
]–[7
] buttons or sliders to boost or cut each
of the five bands.
Use the [8
] buttons to boost or cut all the five bands at the same time.
4
Adjust the Q (bandwidth) and the FREQ (center frequency) of
the band selected in step 3.
To adjust the bandwidth (also called “Shape” or “Q”), use the [1
] buttons or
slider. The higher the value of Q, the narrower the band width.
To adjust the FREQ (center frequency), use the [2
] buttons or slider. The
available FREQ range is different for each band.
5
Press the [H] or [I] (STORE 1 or 2) button to save the edited EQ
type.
Up to two types of EQ can be created and saved. The saved EQ can be recalled
from the EQ tab display by using the [A]/[B] buttons.
3
5
2
4
