Yamaha Tyros4, Справочное руководство

Страница: 14 / 141

14 Tyros4 Reference Manual
VIBRATO
Vibrato is a quavering, vibrating sound effect that is produced by regu-
larly modulating the pitch of the Voice.

EFFECT/EQ Page
1 REVERB DEPTH/CHORUS DEPTH/DSP DEPTH/PANEL SUSTAIN
2 DSP
3 EQ
Determines the Frequency and Gain of the Low and High EQ bands. For informa-
tion about EQ, refer to
page 112 .

HARMONY Page
Same as in the [FUNCTION]

[F] HARMONY/ECHO display. See “Selecting
the Harmony/Echo type” on page 7 .
Pitch
Time
DEPTH
SPEED
DELAY
[6

] DEPTH Determines the intensity of the Vibrato effect. Higher settings result in a more pro-
nounced Vibrato.
[7

] SPEED Determines the speed of the Vibrato effect.
[8

] DELAY Determines the amount of time that elapses between the playing of a key and the start
of the Vibrato effect. Higher settings increase the delay of the Vibrato onset.
[1

]/
[2

]
REVERB DEPTH Adjusts the reverb depth.
[3

]/
[4

]
CHORUS DEPTH Adjusts the chorus depth.
[5

] DSP ON/OFF Determines whether the DSP is on or off.
This setting can also be made from the VOICE EFFECT [DSP] button on the panel.
[6

] DSP DEPTH Adjusts the DSP depth.
If you want to re-select the DSP type, you can do so in the “2 DSP” menu explained
below.
[7

] PANEL SUSTAIN Determines the sustain level applied to the edited Voice when the VOICE EFFECT
[SUSTAIN] button on the panel is turned on.
[1

]–
[4

]
DSP TYPE Selects the DSP effect category and type. Select a type after selecting a category.
[5

]–
[8

]
VARIATION Two variations are provided for each DSP type. Here, you can edit the VARIATION
on/off status and variation’s parameter value setting.
[5

] ON/OFF Turns the DSP Variation on or off for the selected Voice. This setting can also be made
from the VOICE EFFECT [VARIATION] button on the panel. (This button is effec-
tive only when the [DSP] button is on.)
PARAMETER Displays the variation parameter. (This differs depending on the effect type and can-
not be changed.)
[6

]
–[8

]
VALUE Adjusts the value of the DSP variation parameter.