Yamaha Tyros3, Справочное руководство

Страница: 116 / 130

10
10
C
onnections – U
sing
T
yr
os3 with O
ther D
evices –
116
• Tyros3 Reference Manual
MIDI Receive Settings
The explanations here apply to the RECEIVE Page in step 4 on page 112 . This determines which parts will receive
MIDI data and over which MIDI channels the data will be received.
1
Use the [A]/[B] buttons or [1
▲▼
]/[2
▲▼
] buttons to select the chan-
nel to be received
The Tyros3 can receive MIDI messages over 32 channels (16 channels x 2
ports).
2
Use the [3
▲▼
] buttons to select the part via which the selected chan-
nel will be received.
With the exception of the two parts below, the configuration of the parts is the
same as those already explained elsewhere in the Owner’s Manual.
●
KEYBOARD
The received note messages control the Tyros3’s keyboard performance.
●
EXTRA PART 1–4
There are four parts specially reserved for receiving and playing MIDI data.
Normally, these parts are not used by the instrument itself. The Tyros3 can be
used as a 32-channel multi-timbral tone generator by using these four parts in
addition to the parts (except for the microphone sound).
3
Use the [4
▲▼
]–[8
▲▼
] button to determine the types of data to be
received.
1
1 2 3
The dots corresponding to each
channel (1–16) flash briefly when-
ever any data is received on the
channel(s).
MIDI transmission/reception via the USB terminal and MIDI terminals
The relationship between the [MIDI] terminals and the [USB] terminal which can be used for transmitting/
receiving 32 channels (16 channels x 2 ports) of the MIDI messages is as follows:
●
MIDI reception
●
MIDI transmission
MIDI A IN
terminal
USB
connector
MIDI B IN
terminal
MIDI A OUT
terminal
USB
connector
MIDI B OUT
terminal
Port handling
USB2 USB1
Merge Merge
MIDI A 01–16 MIDI B 01–16 MIDI A 01–16 MIDI B 01–16