Yamaha TT-R90E, Руководство по эксплуатации для владельца

Страница: 136 / 340

3 - 10
INSP
ADJ
SPARK ARRESTER CLEANING (For USA)
6. Install:
●
Tappet cover (intake side) 1
●
O-ring 2
NOTE:
Apply the lithium soap base grease on the O-ring.
7. Install:
●
Tappet cover (exhaust side)
●
O-ring
●
Spark plug
●
Timing plug
●
Crankshaft end cover
NOTE:
Apply the lithium soap base grease on the O-ring.
8. Install:
●
Air filter case
●
Air scoop (right)
SPARK ARRESTER CLEANING (For USA)
WARNING
●
Be sure the exhaust pipe and muffler are
cool before cleaning the spark arrester.
●
Do not start the engine when cleaning the
exhaust system.
1. Remove:
●
Bolt (tailpipe) 1
2. Remove:
●
Tailpipe 2
Pull the tailpipe out of the muffler.
3. Clean:
●
Spark arrester
Use a wire brush to remove any carbon
deposits from the spark arrester portion
of the muffler body
3 inner surface.
Tap the tailpipe lightly and remove the
carbon deposits from the outside por-
tion
a
of the tailpipe.
4. Install:
●
Tailpipe
Insert the tailpipe into the muffler and
align the bolt hole.
●
Bolt (tailpipe)
T
R .
.
18 Nm (1.8 m · kg, 13 ft · lb)
New
T
R
.
.
18 Nm (1.8 m · kg, 13 ft · lb)
New
T
R
.
.
13 Nm (1.3 m · kg, 9.4 ft · lb)
T
R
.
.
7 Nm (0.7 m · kg, 5.1 ft · lb)
T
R
.
.
7 Nm (0.7 m · kg, 5.1 ft · lb)
2
1
3
a
T
R .
.
7 Nm (0.7 m · kg, 5.1 ft · lb)