3 - 2
INSP
ADJ
PRE-OPERATION INSPECTION AND MAINTENANCE
*: Since these items requires special tools data and technical skills, they should be serviced.
*
1
: For USA
SERVICE NOTES:
No. 1. DRIVE CHAIN: In addition to tension and alignment, chain must be lubricated every
0.5 ~ 1.0 hour. If unit is subjected to extremely hard usage and wet weather riding, chain
must be checked constantly. See “Lubrication Intervals” for additional details.
No. 2. AIR FILTER: Remove and clean filter every 20 ~ 40 hours.
PRE-OPERATION INSPECTION AND MAINTENANCE
Before riding for break-in operation, practice or a race, make sure the machine is in good operating
condition.
Before using this machine, check the following points.
GENERAL INSPECTION AND MAINTENANCE
*
Chassis fasteners
Make sure that all nuts, bolts and screws are
properly tightened.
Tighten if necessary.
Sidestand
Check operation.
Lubricate and repair if necessary.
*
Spark arrester
*
1
Clean.
*
Front fork
Check operation and for oil leakage.
Correct accordingly.
*
Rear shock
absorber assembly
Check operation and shock absorber for oil
leakage.
Replace shock absorber assembly if necessary.
Battery
Check terminal for corrosion.
Clean if necessary.
Item
Routine
Page
Brake
Check operation/adjustment.
P3-11
Engine oil
Change oil as required.
P3-5 ~ 7
Drive chain
Check alignment/adjustment/lubrication.
P3-12 ~ 13
Spark plug
Check color/condition.
P3-19
Throttle
Check for proper throttle cable operation.
P3-3
Air filter
Foam type – must be clean and damp oil always
P3-3 ~ 4
Wheels and tires
Check pressure/runout/spoke tightness/bead stopper/axle nuts.
P3-14 ~ 15
Fittings/fasteners
Check all – tighten as necessary.
P2-13
Dealer
Note
Item
Checks and maintenance jobs
Initial
Every
10 hours
(1 month)
60 hours
(6 months)
120 hours
(12 months)
3
Содержание TT-R90E
